This is a specific stainless steel solar panel bracket for bent tiled roofs, 5mm thick with an adjustment from 6 to 9.5 cm. This adjustable high bracket is suitable for all roofs with pitched tiles.

K102D01 – High bracket for fixing photovoltaic and solar panels on bent tiled roofs - Description

• Patented bracket for not drilling the roof; to be used with the Ms Sealant adhesive

• Fast, safe, and universal system for anchoring solar panels on bent tiled roofs

• 16x18 cm stainless steel plate, 1.5 mm thick, with two high-pressure-fixed pins that ensure a watertight seal, extraction resistance, and rotation resistance; the plate has various holes for fixing to choose the point of maximum grip for the plug; suitable for positioning under the tile.

• Stainless steel bracket, 5 mm thick, made with two components allowing an adjustment in height from 6 to 12 cm and a length adjustment of 4 + 4 cm; 1 bolt and 3 stainless steel nuts.

• Suitable for positioning on the ridge of bent tiles (or clay tiles).

• The large support surface of 40 cm2 provides great stability and weight distribution.

• In addition to the classic fixing anchor, we can also use special high-quality polymeric adhesives/sealants (see C100T01).

This has led to a reduction and optimization:

1. The number of anchors needed for mounting the panels.
2. The hours spent working on the roof.
3. The likelihood of any infiltration after fixing the solar panels on the waterproofing layers, insulators, and impermeable roof coverings.

Our solar panel brackets for bent tiled roofs, being positioned under the bent tile, become an integral part of the roof and not only do not weaken but also enhance the solidity of the base to which they are anchored.

They can be fixed, with appropriate rails, at intervals of 100/130 cm from each other and are positioned following the pitch of the bent tiles, therefore eliminating the need for measuring the positions.